Item #C26
Wavy Textured Copper Cuff - #3
This is a 1 3/8" wide copper cuff made from 14 gauge copper. I have rolled and textured
it with a lace design then hammered to form by doming areas in it to
give it a wavy design. It is sanded to 1200 grit, and is spring hardened. Marked on the inside with DHT 43.
The cuff measures 6 1/2" around with 1" opening and can be
slightly adjusted for your wrist. ViewViewView
Item #C25
Wavy Textured Copper Cuff - #2
This is a 1 3/8" wide copper cuff made from 14 gauge copper. I have rolled and textured
it with a lace design then hammered to form by doming areas in it to
give it a wavy design. It is sanded to 1200 grit, and is spring hardened. Marked on the inside with DHT 43.
The cuff measures 6 1/2" around with 1" opening and can be
slightly adjusted for your wrist. ViewViewView
Item #C24
Wavy textured Copper Cuff - #1
This is a 1 3/8" wide copper cuff made from 14 gauge copper. I have rolled and textured
it with a lace design then hammered to form by doming areas in it to
give it a wavy design. It is sanded to 1200 grit, and is spring hardened. Marked on the inside with DHT 43.
The cuff measures 6 1/2" around with 1" opening and can be
slightly adjusted for your wrist. ViewViewView
Item #C23
Textured Copper Cuff - #3
This is a 1 1/2" wide copper cuff made from 14 gauge copper. I have rolled and textured
it with a netted design half and half with a plain area with lines, then hammered to form. It is sanded to 1200 grit, and is spring hardened. Marked on the inside with
DHT 43.
The cuff measures 6 1/2" around with 1" opening and can be
slightly adjusted for your wrist. View
Item #C22
Textured Copper Cuff - #2
This is a 1 1/2" wide copper cuff made from 14 gauge copper. I have rolled and textured
it with a netted design and a short plain area with lines, then hammered to form. It is sanded to 1200 grit, and is spring hardened. Marked on the inside with DHT 43.
The cuff measures 6 1/2" around with 1" opening and can be
slightly adjusted for your wrist. View
Item #C21
Textured Copper Cuff - #1
This is a 1 3/8" wide copper cuff made from 14 gauge copper. I have rolled and textured it, then hammered to form. It is sanded to 1200 grit, and is spring hardened. Marked on the inside with DHT 43.
The cuff measures 6 1/2" around with 1" opening and can be
slightly adjusted for your wrist. View
Click for close-up view
Item #C20
"Time ~ Is On Your Side" Watch Cuff A hand formed cuff with a lacy
and striped design with a Vintage Bulova Swiss watch, diamond chips in
white gold arms, affixed with Sterling Silver wire. The cuff
measures 1 1/4" wide, and the inside measurements are 2 5/8"
wide by 1 7/8" depth. This can be formed around your wrist very
easily. Watch is set at 4:43 - it is, after all, on your side. ViewViewView
Click for close-up view
Item #C18
Abacus Cuff Sterling Silver wire and Sterling separators
form this lovely 1 1/4" wide by 7" long cuff with drilled Carnelians,
Lapis, Garnet and Rock Crystal stone beads. Separators are marked with
DHT 43 on the inside two. Easy to wear and forms easily to your wrist. ViewViewViewViewViewView
Click for close-up view
